Specifications
1. Generator Set
Engine Brand | Geely |
Engine Model | AP-25 |
Number of Cylinders | 6 |
Bore/Stroke | 129×165 mm |
Displacement | 12.94 L |
Compression Ratio | 10.5:1 |
Rated Speed | 1500/1800 r/min |
Intake Type | Turbocharged and Intercooled |
Cooling Method | Closed-loop forced water cooling |
Lubrication Method | Pressurized and splash lubrication |
Oil Pressure | 2.5 bar–5.8 bar |
Oil Temperature | ≤105°C |
Oil Capacity | 32 L |
Firing Order | 1-5-3-6-2-4 |
Crankshaft Rotation | Counterclockwise |
Fuel Intake Pressure | 5 kPa |
2. Engine
Brand | Geely |
Model | HMT13F.408 30 |
Continuous Power | 250KW |
Rated Current | 450A |
Rated Frequency | 50/60Hz |
Power Factor | 0.8 |
Starting Method | DC 24V Electric Start |
Speed Control Method | Electronic Speed Control |
Fuel Control Method | Lean Burn, Closed-Loop Control |
Ignition Method | High-Voltage Spark Plug Ignition |
Generator Set Operation Mode | One-Key Auto Start |
Oil Consumption Rate | ≤0.3g/kWh |
Noise | 10 meters ≤ 101 dB(A) |
NOx Emissions | 1.347g/kWh |
Electrical Efficiency | 35% |
Thermal Efficiency | 47% |
Electrical Certification | ETL |
Generator Set Dimensions | 3100X1330X1590mm |
Generator Set Weight | 3140kg |
Number of Phases and Connection Method | Three-Phase Four-Wire, Star Connection |
Cooling Method | Pen-type Circulating Forced Water Cooling |
Air Source Inlet Pressure | 0.4Mpa |
Air Source Outlet Pressure | 5-10Kpa |
3. Generator
Generator Brand | Stanford generator |
Model | XSA4E |
Number of Phases | Three-Phase Four-Wire |
Insulation Class | H |
Protection Level | IP23 |
Excitation Method | Brushless Excitation |
Continuous Power | 250 kW |
Rated Speed | 1500/1800 r/min |
Frequency | 50/60 Hz |
Voltage | 400 V |
Current | 450 A |
Waveform | Sine Wave |
For most areas, the liquid cooling equipment will be shipped to you via sea freight. Ports and receiving points in different regions will incur different shipping charges. It is recommended that you contact customer service to confirm address details and calculate shipping costs before placing an order.