Antminer APW12 1215 Power Supply
$135.00
Function: Suit for Antminer E9, D7, S19+, S19A pro, S19A, S19j pro, S19j, S19i, S19, S19 Pro, T19 , etc. air cooling miner.
- Antminer APW12 PSU
- Manufacturer Warranty
Trusted By
Antminer APW12 PSU 1215 is currently widely utilized, particularly in most Antminer S19 series models. The numerical designation “1215” indicates its output voltage range of 12-15V. This power supply is available in several versions denoted as a, b, c, d, e, and f.
| APW12 1215a | S19, S19j, S19 Pro, S19j Pro, S19a Pro, S19a, S19i, T19, D7, E9, E11, EP Pro |
| APW12 1215b | S19, S19j, S19 Pro, S19j Pro, S19a Pro, S19a, S19i, T19, D7, E9, E11, EP Pro |
| APW12 1215c | S19, S19j, S19j+, S19 Pro, S19j Pro, S19a, T19, D7, E9, E11 |
| APW12 1215d | S19, S19 Pro, S19j Pro, S19j Pro+, S19XP |
| APW12 1215e | Antminer S19 Pro, S19j Pro, S19XP |
| APW12 1215f | S19, S19 Pro, S19j Pro, S19j Pro+, S19XP, S19K Pro |
| APW12 1215g | Antminer S19 Pro-A |
| APW12 | ||
| OUT1 | DC Voltage | 12V – 15V |
| Rated Current (220V input) | 233A | |
| Ripple & Noise | <1% | |
| Line Regulation | <1% | |
| Load Regulation | <1% | |
| Setup Time | <2S | |
| Short Circuit Protection | >10mS | |
| OUT2 | DC Voltage | 12.3V |
| Rated Current (220V input) | 15A | |
| Ripple & Noise | <1% | |
| Voltage Accuracy | 12.2V – 12.4V | |
| Line Regulation | <1% | |
| Load Regulation | <1% | |
| Setup Time | <2S | |
| Short Circuit Protection | >10mS | |
| Input | Voltage Range | 200 – 240V AC |
| Frequency Range | 47 – 63Hz | |
| Power Factor | >0.99 (full load) | |
| Leakage Current | <1.5mA (220V 50Hz) | |
| Protection | Low-voltage Input | 80 – 89V AC |
| Output Short Circuit | Yes | |
| Overheat Protection | Yes | |
| Over-current Output | 291A – 350A | |
| (protection value varies under different voltage) | ||
| Environment | Operating Temperature | -20 – 45℃ |
| Operating Humidity | 20% – 90%RH (non-condensing) | |
| Altitude | < 2000m | |
| Structure | Dimensions | 254.6mm * 251.6mm * 63mm |
| Net Weight | 3.6KG | |
| Cooling System | forced‐air cooling | |
| Noise | 45dBA | |
Whatsminer P221 PSU is used to replace faulty power supplies in Whatsminer miners. It is essential for the miner’s operation. When a power supply fails, replacing it immediately ensures the miner can quickly resume operation. We offer a variety of Whatsminer power supplies with ample stock available. There exist two versions, version b and version c.
| Whatsminer P221B | M60, M60S, M30S++, M50, M50S, M50S+, M50S++, M30S, M30S+, M31S+ |
| Whatsminer P221C | Whatsminer M20, M30, M31, M32, M30S, M30S+, M30S++, M50 series |
| Model | P221B-AR-12-3300-B-V02 |
| Input: | 220-240VAC 50/60HZ 16A MAX |
| Output: | 12V 265A；12V 15A |
| Model | P221C-12-3300-C-V01 |
| Input: | 220-240VAC 50/60HZ 16A MAX |
| Output: | 14.5V 256V; 12V 15A |
Note: To avoid damage to your equipment, verify the version and model of your miner before replacing your power supply. We recommend confirming the compatible power supply model with our online customer service before placing your order.
Note: When replacing your power supply, verify the version and model of your miner to avoid purchasing an incompatible unit that could damage your equipment. We recommend confirming the required power supply model with our online customer service before placing your order to ensure compatibility with your miner.
| Specification | APW12 1215a, APW12 1215b, APW12 1215c, APW12 1215d, APW12 1215e, APW12 1215f, APW12 1215g |
|---|
Related products
Power Supply
6000W 8000W PSU For Overclocking Hashrate Increasing Used With Immersion Cooling System
Power Supply
