The Bitmain APW11 Power Supply (17V-21.6V EMC PSU) is ideal for powering water-cooled Antminer rigs, including the S21 Hydro, S19XP Hydro, S19 Hydro, T19 Hydro, S19 Pro Hydro, and S19 Pro+ Hydro SHA256 models. Ensure compatibility with your miner version by contacting our sales team before purchasing the APW11 PSU.
Note: Please update your ANTMINER with the newest firmware accordingly after replacing the power supply. You can contact us for the firware.
Product Glance | |
Out1 | |
DC Voltage | 17V-21.6V |
Rated Current(380V input) | 300A |
Rated Power(380Vinput) | 6500W |
Ripple & Noise | <1% |
Line Regulation | <1% |
Load Regulation | <1% |
Setup Time | <5S |
Short Circuit Protection | >10mS |
Detailed Characteristics | |
Out2 | |
DC Voltage | 12.3V |
Rated Current(220 V input) | 1A |
Ripple & Noise | <1% |
Voltage Accuracy | 12.2V—12.4V |
Line Regulation | <1% |
Load Regulation | <1% |
Setup Time | <5S |
Short Circuit Protection | >10mS |
Voltage Range | 380 – 415V AC |
Frequency Range | 50~60 Hz |
Power Factor | >0.99 (full load) |
Leakage Current | <1.5mA (380V 50Hz) |
Low-voltage Input | <304V AC |
Output Short Circuit | Yes |
Overheat Protection | Yes |
Over-current Output | 300A – 350A |
Operating Temperature | -20 – 45℃ |
Operating Humidity | 20% – 90%RH (non-condensing) |
Altitude | <2000m |
Dimensions | 320mm * 179mm * 63mm |
Net Weight | 5kg |
Cooling System | Water cooling |
Inlet temperature | 20 – 35 ℃ |
Water flow rate | 8L/min |
Water pressure | 3 BAR |
While APW11 17V-21.6V EMC (b Version) suit for Antminer S19 Hyd / S19XP Hyd / T19 Hyd / S19 Pro+ Hyd SHA256 Hydro-cooling miner;
APW111721c 17V-21.6V RSPri_V1.25 EMC is suit for Antminer S21 Hyd Hydro-cooling miner.